WiMAX Mobile Router User Manual Biscuit
Setting of the WiFi AP Notice : Configuration of WiFi AP has to be set to “Obtain IP address and DNS server address automatically”.
Settings of USB (RNDIS) Notice : 1. Over WiFi Your PC is connected to web server of MOBILE ROUTER through WiFi. RNDIS driver can be downloaded from we
4. Configuring Device Connect to Web User Interface (Web Connection Manager) Start Web User Interface - Use web browser to connect Web User Interface
- Home of Web UI Main Menu bar: User can choose settings of LAN, WiMAX, Management and Power off
Home - Device Information It shows description of Device such as name of device, manufacturer, software version, hardware version, API version and MA
LAN - LAN Status It shows web address of local area network information. - LAN Setting Modify: Input desired IP address and subnet mask that user
This shows device and MAC Address that currently attached to biscuit IP Reservation Settings It is to assign IP address of device with MAC address -
Wi-Fi Setting Information User can turn off Wi-Fi when USB mode is used. Please do not turn off Wi-Fi when it is the only communication method. Enabl
▶ Auto : This support both open system and shared key. ▶ Open System: Open system allow link to all clients but permit communication to clients that h
NAT Setting
Table of Contents 1. Attention ...
Port forwarding setting: Port forwarding is the practice of forwarding a TCP/IP packet in a network address translator gateway to a predetermined netw
Access Restrictions Some IP address range can be blocked by protocol/port. Advanced Routing Dynamic routing setting.
MAC Filter When this option is on, user can either Deny and Allow connected MAC address. MAC address can be selected from client list.
WiMAX Connection Info. This page shows WiMAX connection status Auto Refresh: When check box is enabled, Network and MAC status of device in monitore
Network Info. This page shows WiMAX link status and Neighbor information of BS Auto Refresh : When check box is enabled, Network and MAC status of d
Management Status This page can be seen when you enter into web UI. Firmware information This page shows software and firmware version
Administration Internet-based Time Server (NTP) Setting This option enables Network Time Protocol for this Personal Hotspot to acquire current time f
This is to restore saved configuration file. Upgrade Factory Reset The device can be restored to factory default with this option Firmware Upgrade
Power off This button will make the device turn off without touching physical power button.
1. Attention Keep away from high humidity. Use in a clean place. Place on a stable platform to avoid dropping. Don‟t keep around electromagnetic waves
2. Introduction Components List in the package. ① Main unit ② Charger [5V/2A] ③ User‟s Manual ④ Plug ⑤ USB Cable 6) Pouch
Specification Items Description WiMAX WiMAX Standard Compliance IEEE 802.16e-2005 Air Interface Internal Antenna(0dBi) Max output Power 23dBm WiFi N
① Status LED : WiMAX signal status and WiFi status LED (Color : Blue / Yellow / Green / Red) ② Battery Cover ③ Ventilation Hole ④ USB Port : Batte
LED indication WiMAX Signal LED LED Off Power Off Yellow LED On and Off Frequency scanning or ready Red LED On and Off Connecting with WiMAX network
3. How to use Device Power ON/OFF Power ON : Push and hold power button until WiMAX LED turn on Power OFF : Push and hold power button for 5 seconds
How to insert Battery to device
Comments to this Manuals